Gravity Screen Pro - On / Off v1.71(1021)
Requirements: 2.2+
Overview: This app turns automatically your screen off when you put your phone into your pocket or onto a table and turn the screen on when you take it out or up. No need to touch any button and you are ready to go.
Using your phone often? Tired of the On-Off switching?
This app turns automatically your screen off when you put your phone into your pocket or onto a table and turn the screen on when you take it out or up. No need to touch any button and you are ready to go.
HOW IT WORKS:
It monitors the orientation of the device through the gravity sensor. When your phone is pointing downward by its top, in a certain angle, it's likely to be out of use. In this situation the proximity sensor is activated to determine if it is covered. If yes, the screen turns off because probably you placed the phone into your pocket or onto a table.
To keep the battery usage low the program turns on the proximity sensor only when it's really necessary. Moreover, when it turns your screen off and the proximity sensor is covered it puts your phone into deep sleep state to save as much energy as possible.
MAIN FEATURES:
- Pocket Sensor: Recognizes if your phone is in your pocket. By turning your phone below the angle you set, it'll prepare to turn the screen off.
- Table Sensor: Detects your phone is lying on a table and turns the screen off.
- Turn Screen On by Motion: If the screen is off and it's facing up the device can be woken up by any movements, for example lift up by hand.
- Keep Screen On by Motion: It's a Screebl like feature but it's relying on the small movements you are doing by your hand while holding the phone. If small motions are detected while the screen is facing up the feature keeps the screen on because it can be suspected that the phone is held and probably you are reading something long. If the phone is steady the normal screen timeout will apply in any position you leave your device.
- Tasker, Llama, Locale supported by plug-in.
BATTERY USAGE:
It should be not significant. I experienced about 6 per cent extra consumption on the test device. However it can be much higher by often using the Turn Screen On by Motion feature. Thus, keep your phone face down if you want to save energy.
IMPORTANT:
On some devices (e.g. HTC One) the alarm clock is switched off by the app after it had gone off! Please check if it's the case for you. If, yes, use a third party app, for example: https://play.google.com/store/apps/details?id=com.vp.alarmClockPlusDock
SIDE NOTE:
- The app was not widely tested. Hopefully it will work fine for you. But, if you experience any issue or just have a question, please email me.
FREE vs. PRO VERSION
In the Pro version the screen can be turned on by motion up to 16 hours instead of 15 minutes. Also, in the Pro version the Table sensor is more accurate.
What's news:
- - - v1.69- - -
Fixed:
- trying to fix the bugs came with the v1.68. Sorry about it, and many thanks for your feedbacks. Not easy to make a better version
Please, let me know if you can find more bugs.
If the app does not work properly after the update, try to re-install it to solve the problem.
This app has NO advertisements
More Info:
Download Instructions:Released by iKira
http://www.kingfiles.net/x9leu9rbrlxz/bvgftrytg71.rar
mirror:
http://ul.to/yksj1v9p
http://hugefiles.net/mh7udlvig2mm
Requirements: 2.2+
Overview: This app turns automatically your screen off when you put your phone into your pocket or onto a table and turn the screen on when you take it out or up. No need to touch any button and you are ready to go.
Using your phone often? Tired of the On-Off switching?
This app turns automatically your screen off when you put your phone into your pocket or onto a table and turn the screen on when you take it out or up. No need to touch any button and you are ready to go.
HOW IT WORKS:
It monitors the orientation of the device through the gravity sensor. When your phone is pointing downward by its top, in a certain angle, it's likely to be out of use. In this situation the proximity sensor is activated to determine if it is covered. If yes, the screen turns off because probably you placed the phone into your pocket or onto a table.
To keep the battery usage low the program turns on the proximity sensor only when it's really necessary. Moreover, when it turns your screen off and the proximity sensor is covered it puts your phone into deep sleep state to save as much energy as possible.
MAIN FEATURES:
- Pocket Sensor: Recognizes if your phone is in your pocket. By turning your phone below the angle you set, it'll prepare to turn the screen off.
- Table Sensor: Detects your phone is lying on a table and turns the screen off.
- Turn Screen On by Motion: If the screen is off and it's facing up the device can be woken up by any movements, for example lift up by hand.
- Keep Screen On by Motion: It's a Screebl like feature but it's relying on the small movements you are doing by your hand while holding the phone. If small motions are detected while the screen is facing up the feature keeps the screen on because it can be suspected that the phone is held and probably you are reading something long. If the phone is steady the normal screen timeout will apply in any position you leave your device.
- Tasker, Llama, Locale supported by plug-in.
BATTERY USAGE:
It should be not significant. I experienced about 6 per cent extra consumption on the test device. However it can be much higher by often using the Turn Screen On by Motion feature. Thus, keep your phone face down if you want to save energy.
IMPORTANT:
On some devices (e.g. HTC One) the alarm clock is switched off by the app after it had gone off! Please check if it's the case for you. If, yes, use a third party app, for example: https://play.google.com/store/apps/details?id=com.vp.alarmClockPlusDock
SIDE NOTE:
- The app was not widely tested. Hopefully it will work fine for you. But, if you experience any issue or just have a question, please email me.
FREE vs. PRO VERSION
In the Pro version the screen can be turned on by motion up to 16 hours instead of 15 minutes. Also, in the Pro version the Table sensor is more accurate.
What's news:
- - - v1.69- - -
Fixed:
- trying to fix the bugs came with the v1.68. Sorry about it, and many thanks for your feedbacks. Not easy to make a better version
Please, let me know if you can find more bugs.If the app does not work properly after the update, try to re-install it to solve the problem.
This app has NO advertisements
More Info:
Code:
https://play.google.com/store/apps/details?id=com.plexnor.gravityscreenoffpro
Download Instructions:Released by iKira
http://www.kingfiles.net/x9leu9rbrlxz/bvgftrytg71.rar
mirror:
http://ul.to/yksj1v9p
http://hugefiles.net/mh7udlvig2mm
puchi35 — Thu Oct 24, 2013 11:55 am
